Batch Convert CATPart/CATProduct/CATDrawing to 3DXML/STEP/IGES/DXF/DWG/ or Reverse


In CATIA V5/V6/3DEXPERIENCE, users have the ability to convert data in batch mode. When using V6 and 3DEXPERIENCE, this will automatically import/export data from the ENOVIA database. The following example is performed using CATIA V5 but is identical in V6 and 3DEXPERIENCE. However, with V6 and 3DEXPERIENCE, you must connect to the ENOVIA database to import/export data.

  1. Browse to “Batch Management” which can be found under Start > All Programs > CATIA/3DEXPERIENCE [your installed version] > Tools
  2. This will load Batch Monitor. Please double click on BATCH-DXF-IGES-STEP:Batch Convert CATPart
  3.  This will launch the utility to Batch convert:

Batch Convert CATPart


  • The output must be selected prior to adding files as the output type cannot be changed without removing the file from the list.
  • If using a remote host, please ensure the same level of CATIA is also installed on it.
  • Use OPTIONS to modify the output of a particular type.


Watch the video below to see this in action:

For further support please get in touch

Amit Patel
Senior Engineer